Withdrawal
Remove the expansion tank cap and drain the coolant.
On vehicles with automatic transmission, disconnect the oil cooling pipes from the radiator.
Disconnect the inlet hose and purge tube from the radiator.
Remove the radiator from the engine compartment by unscrewing the two upper mounting bolts.
Installation
Check the condition of the radiator rubber pads and replace if necessary.
Install the radiator so that the rubber pads are located between the legs of the radiator.
Connect the hoses to the radiator. On vehicles with automatic transmission, connect the oil cooling pipes to the radiator.
Pour fluid into the expansion tank and bleed air from the cooling system.