Introduction There are some very simple checks that will only take you a few minutes, but will save you a lot of trouble, saving you a lot of time and money in the future....
Checkpoints under the hood 4 cylinder engine (2.0L engine shown) A - dipstick for checking the engine oil level B - oil filler cap C - expansion tank of the cooling system D - brake and...
Engine oil level Before starting the engine Make sure. that the vehicle is on a level surface. Check the oil level before starting the engine or not earlier than 5 minutes...
Coolant level Attention! Do not attempt to remove the expansion tank cap while the engine is warm, as you risk scalding yourself. Do not leave the coolant container open for...
Fluid level in the brake system (and clutch) Note. Hydraulic brake and clutch systems share a common reserve fluid reservoir. Warning. Brake fluid is harmful to eyes and painted surfaces. Handle her with...
Fluid level in the hydraulic steering system Before checking Park the machine on a level surface. Turn the steering wheel to the straight ahead position. Turn off the engine. For a correct test, do not...
Tire condition and pressure It is very important to keep your tires in good condition and make sure they are properly inflated - bursting a tire at high speed is very dangerous. Tire wear...
Types of tire wear Wear on the side of the treadmill Low tire pressure (wear on both sides) Low pressure causes the tire to overheat due to its increased deformation. The tread...
Washer fluid level If your vehicle is equipped with headlight washers, they are supplied from the windshield washer reservoir. Windshield washer fluid contains additives that not...
Wiper blades 1. Check the condition of the wiper blades; if they have cracks or other signs of damage, or if they scratch the glass, replace them. Regardless of condition,...
Battery Caution: Before working on the battery, reread the cautions in " Safety First " at the beginning of this guide. Make sure the battery tray is in good condition...
Bulbs and fuses Check all external lights and horn. If any circuit does not work, refer to the relevant section for explanations chapter 12 . Inspect all available connectors...