- Before removing, thoroughly clean the connection points and their surroundings.
- Place removed parts in a clean place and cover. Use film and paper, do not use rags with lint.
- Open parts must be carefully covered or sealed if repairs are not made immediately.
- Install only clean parts.
- Remove spare parts from packaging immediately before installation. Install only clean parts.
- Do not install parts that were not in the packaging (for example, taken from a toolbox).
- If possible, do not work with compressed air when the fuel system is open. If possible, do not move the vehicle.
- If possible, do not move the vehicle.
You can find the original version on the portal: «BMWMan.ru»