Withdrawal
1. Release the steering column adjustment mechanism and move the column up as far as possible. Lock the steering column.
The cover has been removed in the illustration to show the attachment points.
2. Turn out screws -1-.
3. Remove clips -2-. To do this, first remove the pins in the center and then remove the clip.
4. Rotate 90° (1/4 turn) clamp -3- by releasing it.
5. Press brackets -4- towards the steering column and release them.
6. Lay facing -5- down.
7. Disconnect the electrical wires of the footwell illumination lamp, the horn -6- and the on-board diagnostics box.
Installation
Installation is carried out in the reverse order of removal.