Removal and installation the upper part of the front bumper trim (from 09/2006)
1. Remove both fog lights.
2. Remove the upper decorative grille.
3. Remove both middle decorative radiator grilles.
4. Remove both headlight washer system covers.
5. Release the bumper trim (2) from the clips (1) on the reverse side.
6. Remove the upper part (3) of the bumper trim.
Note: The fasteners (1) must not be damaged.
7. Installation should be carried out in the reverse order of removal, taking into account the above notes.
(The original text is available on the website BMWMan)