Car air conditioner BMW X3 E83

Air conditioning system — equipment and tools
Drawing Name and code 641020 Unlocking hook

Instructions for handling refrigerant R 134A
Attention: Although R 134a is not toxic, flammable or explosive in any proportion to air at normal temperatures, certain safety precautions must be taken when...

Safety precautions for handling refrigeration oil
Attention: Risk of injury. High pressure in the refrigerant circuit. Only qualified specialists are allowed to work on the pressure circuit. Before carrying...

Refrigerant recovery, vacuuming and filling of the air conditioner (R134A)
Attention: High pressure in the refrigerant circuit. Carry out repair work only when there is no pressure in the refrigerant circuit. Avoid contact with...

Removal and installation the heater
Attention: High pressure in the refrigerant circuit. Observe safety precautions when handling R134a refrigerant. Avoid contact with refrigerant and...

Heating and air conditioning fan
Removal and installation the heating and air conditioning fan 1. Remove the heater partition. 2. Disconnect the pipeline (1) from the fitting (2) in the...

Heating and air conditioning control panel
Removal and installation the heating and air conditioning control panel Caution: Follow the ESD protection instructions (ESD - Electrostatic DIs-harge). 1....

Air conditioner compressor
Removal and installation the air conditioning compressor Attention: High pressure in the refrigerant circuit. Carry out repair work only when there is no...

Air conditioner dehydrator tank
Removal and installation the air conditioner dehydrator tank Attention: High pressure in the refrigerant circuit. Carry out repair work only when there is no...

Air conditioner condenser
Removal and installation the air conditioner condenser Attention: High pressure in the refrigerant circuit. Carry out repair work only when there is no...

Microfilter housing for the cabin ventilation system
Removal and installation the cabin ventilation system microfilter housing 1. Remove the microfilter. 2. Remove the cable box cover. 3. Unscrew the screws (1)....

Microfilter for the cabin ventilation system
Removal and installation the cabin ventilation system microfilter 1. Turn the cam (1) approximately 90° and remove the cover (2) by moving it away from you. 2....

Heating element temperature sensor
Removal and installation the heating element temperature sensor 1. Remove the switch block on the small items compartment. 2. Remove the temperature sensor (1)...

Evaporator temperature sensor
Removal and installation the evaporator temperature sensor 1. Remove the pedal mechanism cover. Note: For clarity, the left footwell heating duct is removed in...

Solar sensor
Removal and installation the solar sensor 1. Remove the instrument panel trim. 2. Hook the solar sensor (1) using tool 641020 and press it in the direction...

Servo drive for ventilation grilles
Removal and installation the ventilation grille servo drive 1. Remove the pedal mechanism cover. 2. Remove the lower steering column cover. Note: For clarity,...

Flap servo in the legroom
Removal the footwell flap servo 1. Remove the glove compartment. 2. Disconnect the adjustment lever (1). 3. Disconnect the connector (1). 4. Unlock the servo...

Servo drive for heated glass flaps
Removal and installation the servo drive for the heated glass flaps 1. Remove the ventilation flap servo drive. 2. Unlock the servo drive (1) and remove it by...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: