- Home
- BMW X3
- E83
- Power unit
- Engine management
Car engine management system BMW X3 E83
BMW X3 E83 engine management system repair includes diagnostic equipment and tools. The adjustment probe for the M47 T2, N47, M57 T2, M57 TU, and M54 is described. The exhaust gas recirculation cooler is examined. The auto mechanic receives information on checking and replacing engine control components. BMW X3 E83 owners understand the relationship between the engine management system, fuel injection, exhaust, and electrical system. This material applies to the E83 body and supplements the powertrain manual.
Adjustment probe (M47 T2)
Replacing the adjustment probe (M47 T2) 1. Read the fault codes in the DDE ECU memory, and process the test plans if necessary. 2. Turn off the ignition. 3....
Replacing the adjustment probe (M47 T2) 1. Read the fault codes in the DDE ECU memory, and process the test plans if necessary. 2. Turn off the ignition. 3....
Adjustment probe (N47)
Replacing the adjustment probe (N47) 1. Read the fault codes in the DDE ECU memory, and process the test plans if necessary. 2. Turn off the ignition....
Replacing the adjustment probe (N47) 1. Read the fault codes in the DDE ECU memory, and process the test plans if necessary. 2. Turn off the ignition....
Adjustment probe (M57 T2, M57 TU)
Replacing the adjustment probe (M57 T2/M57 TU) 1. Read the fault codes in the DDE ECU memory, and process the test plans if necessary. 2. Turn off the...
Replacing the adjustment probe (M57 T2/M57 TU) 1. Read the fault codes in the DDE ECU memory, and process the test plans if necessary. 2. Turn off the...
Adjustment probe (M54)
Replacing the adjustment probe (M54) 1. Read and erase information in the fault memory. Note: Before removing the control lambda probe, it is necessary to...
Replacing the adjustment probe (M54) 1. Read and erase information in the fault memory. Note: Before removing the control lambda probe, it is necessary to...
Exhaust gas recirculation radiator
Removal and installation or replacing the EGR cooler Caution: Risk of burns. This work should only be performed on a cold engine. 1. Remove the soundproofing...
Removal and installation or replacing the EGR cooler Caution: Risk of burns. This work should only be performed on a cold engine. 1. Remove the soundproofing...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Similar sections for other types of BMW cars:
Power unit: Control system BMW 5 Series E28 (1981-1988)
Power unit: Control system BMW 5 Series E28 (1981-1988)
Share information:
- General information
- Introduction to manual
- Troubleshooting
- User manual
- Maintenance
- Power unit
- Diesel engine M47 T2
- Diesel engine N47
- Diesel engine M57 T2/TU
- Petrol engine N46
- Petrol engine N52
- Petrol engine M54
- Cooling system
- Lubrication system
- Fuel system
- Engine management
- Intake and exhaust system
- Engine electrical equipment
- Transmission
- Clutch
- Gearbox and transfer case
- Drive shafts and axles
- Chassis
- Front suspension
- Rear suspension
- Brake system
- Steering system
- Body
- Exterior
- Doors and windows
- Safety system
- Air conditioner
- Electrical equipment
- Equipment and devices
- Lighting and signaling
- Electrical circuits