Car engine cooling system BMW X3 E83

Cooling system — equipment and tools
Drawing Name and code 170100 Control device

Draining and filling coolant
Draining and filling coolant (M47T2, N47, N52K) 1. Remove the soundproofing casing. 2. Remove the stiffening plate. Caution: Work on the cooling system should...

Bleeding the cooling system and checking it for leaks (M54, N46, N47, N52)
Attention: Risk of steam burn. This operation should only be performed on a cold engine. 1. Unscrew the cap on the expansion tank. 2. Put on the device...

Bleeding the cooling system and checking it for leaks (M47 T2, M57 T2, M57 TU)
Attention: Risk of steam burn. This operation should only be performed on a cold engine. Caution: When working with oil, fuel, and coolant circuits, protect...

Cooling radiator — radiator (m54, n46)
Removal and installation the radiator (M54, N46) Attention: Risk of steam burn. This operation should only be performed on a cold engine. 1. Observe the...

Cooling radiator — radiator (m57 t2, m47 t2, n47)
Removal and installation the radiator (M57T2, M47T2, N47) Attention: Risk of steam burn. This operation should only be performed on a cold engine. 1. Observe...

Water pump (M47 T2, M57 TU, M57 T2)
Removal and installation or replacing the water pump (M47 T2/M57 TU/M57 T2) Caution: When working with oil, fuel, and coolant circuits, protect the generator...

Water pump (N47)
Removal and installation or replacing the water pump (N47) 1. Remove the alternator drive belt. 2. Remove the EGR radiator (only with automatic transmission)....

Water pump (N46)
Removal and installation or replacing the water pump (N46) Attention: Risk of steam burn. These works should be performed only on a cold engine. Attention:...

Water pump (M54)
Removal and installation or replacing the water pump (M54) 1. Remove the alternator drive belt. Note: The coolant drain plug is located on the outlet side of...

Water pump (N52 K)
Removal and installation or replacing the water pump (N52K) Attention: Risk of steam burn. Work should only be performed on a cold engine. Attention: Collect...

Thermostat (M47 T2)
Removing and installing or replacing the thermostat (M47 T2) Attention: When working with oil, fuel and coolant circuits, the generator must be protected from...

Thermostat (N47)
Removal and installation or replacing the thermostat (N47) 1. Remove the EGR radiator. 2. Drain the coolant. 3. Remove the right charge air hose. 4. Unscrew...

Thermostat (M57 TU, M57 T2)
Removal and installation or replacing the thermostat (M57TU/M57T2) 1. Drain the coolant. 2. Remove the fan. 3. Remove the EGR radiator. Attention: Collect the...

Thermostat (N46)
Removal and installation or replacing the thermostat (N46) Attention: Risk of steam burn. These works should be performed only on a cold engine. 1. Unscrew the...

Thermostat (M54)
Removal and installation or replacing the thermostat (M 54) 1. Remove the fan drive coupling with the impeller and fan casing. 2. Drain the coolant and send it...

Thermostat (N52 K)
Removal and installation or replacing the thermostat (N 52 K) Attention: Risk of steam burn. These works should be performed only on a cold engine. Attention:...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: