Removal and installation the upper part of the front bumper trim (until 09/2006)
1. Remove the front bumper trim.
2. Remove both fog lights.
3. Remove the decorative grille on the bumper trim.
4. Remove the middle insert on the bumper trim.
Note: The operation is described for the left side; for the right side it is performed similarly.
5. Unscrew the screws (1).
6. Release the clips (2) on the bumper trim (3).
7. Release the fasteners (1) and remove the upper part (2) of the bumper trim.
Note: If damaged, replace the clips (1) on the upper part (2) of the bumper trim.
8. Remove the decorative radiator grille.
9. If necessary, remove the injectors (3).
10. Installation should be carried out in the reverse order of removal, taking into account the above notes.