Removal and installation the lower part of the front bumper trim (until 09/2006)
1. Remove the front bumper trim.
2. Remove both fog lights.
3. Remove the decorative grille on the bumper trim.
4. Remove the middle insert on the bumper trim.
5. Unscrew the screws (1) on the left and right sides.
6. Release the fasteners (2) of the bumper trim (3) on the left and right sides.
7. Release the fasteners (1) and remove the lower part (2) of the bumper trim.
8. Hook and remove the cover (1) from the lower part (2) of the bumper trim in the direction indicated by the arrow.
Note: The clips (1) on the lower trim (2) of the bumper must not be damaged.
Note: If damaged, replace the brackets (1) on the lower part (3) of the bumper trim.
Note: When replacing in the case of a version with emergency parking distance warning system.
9. Remove the ultrasonic transducers (2) on the lower part (3) of the bumper trim.
10. Remove the grips (4) and spacer rings (5).
11. If necessary, cut holes for the ultrasonic sensors (2) on the lower part (1) of the bumper trim along the stamping.
12. Installation should be carried out in the reverse order of removal, taking into account the above notes.