Withdrawal
1. Remove the center console, refer to the relevant section.
2. Turn out bolts -1- at the holder -6-.
3. Disconnect the cable -2- at the parking brake switch -3-, for which press the spring clip.
4. Pass the cable -2- and -4- through the hole in the center armrest.
5 Loosen bolt -5- without unscrewing it.
6. Slide the center console -6- back so that the bolt -5- is in the mounting hole -7-.
7. Remove the center console up.
Installation
8. Check that the sheet metal nuts -8- are not damaged and replace if necessary.
9. Installation is carried out in the reverse order of removal.