Solex Zenith 35/40 INAT carburetor body parts without auxiliary idle system:
1 - carburetor base; 2 - idle speed mixture quality (composition) adjustment screw; 2a, 23c, 63 - pressure springs; 3 - electromagnetic shut-off valve; 6 - lever with a linkage; 7, 60 - return springs; 8 - hinge bolt; 9 - locking lever, 10 - connecting lever; 11 - retaining ring; 12, 19 - washers; 13 - 2nd chamber throttle actuator lever; 14, 37 - thrust levers; 15, 21, 32, 36 - toothed washers; 16, 18, 25b, 29, 38 - hex nuts; 17, 53 - threaded studs; 20 - 1st chamber throttle control lever; 22 - spacer sleeve; 23a, 30, 31, 55 - sealing gaskets; 23b - diaphragm; 23d - cover of pneumatic drive of automatic starting device; 23e - Countersunk Round Head Screw; 24 - return spring; 25 - adjusting screw; 25a, 42 - sealing rings; 26, 51 - drive levers; 27 - intermediate lever; 28, 52 - retaining rings; 33 - countersunk head screw; 34, 50, 56, 58 - spring washers; 35, 44, 47, 57 - cylindrical head screws; 39 - bimetallic spring housing; 40 - sealing ring; 41 - liquid chamber of the automatic starting device; 43 - Hex head screw; 45 - heat-insulating gasket; 48 - carburetor body; 49 - hinge axis; 54 - 2nd chamber throttle valve pneumatic drive; 59 - axis; 61 - connecting rod; 62 - idle mixture quantity adjusting screw.
(The original article is available on the website «BMWMan.ru»)