Removal and installation of a radiator grille Models E28 («retro») 1. Give screws and remove the central and lateral parts of a lattice. 2. Install in reverse order. Models E34 (modern body) Central grille...
Removal, installation and adjustment of a cowl The hood cover is quite heavy and inconvenient to remove and install - at least two people are required to perform this procedure. Removal and installation 1....
Removal and installation of bumpers Withdrawal 1. Remove the bumper cover (if she is) and where necessary, a front spoiler. 2. Disconnect all wiring and other components that may interfere with...
Removal, installation and adjustment of the door Withdrawal 1. Remove the door trim panel (see Section Removal and installation of the panel of an internal covering of doors ). Disconnect all electrical...
Removal and installation of door glass If your vehicle's radio is equipped with an anti-theft system, make sure you have entered the correct code before disconnecting the battery cable. See section...
Removal and installation of an external mirror Withdrawal 1. If you just need to replace the mirror glass, insert a small screwdriver into the hole in the base of the mirror and carefully pry the plastic...
Removal and installation of seats Front seat 1. Give four bolts of fastening of directing a seat to the bottom and remove a seat from the car. On some models, you may have to disconnect the...
Checking the seat belts 1. Check the seat belts, buckles, latch tabs and guide loops for obvious damage or signs of wear. 2. Check if the warning light comes on "Fasten your seat...
Control body dimensions BMW E28. Upper body, 518, 520, 524, 525, 528, 535, M535, M5 - 1981 ÷ 09.87. BMW E28. Underbody: 518, 518i - 1981 ÷ 9.87; 520i - 1981 ÷ 4.86; 524d - 1981 ÷...