Clutch — general information and device The clutch consists of a driving disc, a driven squeak and a hydraulic drive. The clutch drive plate is mounted on the flywheel, which in turn is mounted on...
Removal and installation, clutch test Withdrawal Remove gearbox. Gradually loosen the drive disc mounting bolts by 1-1½ turns each time until it is unloaded. Caution: If the bolts loosen...
Bleeding the hydraulic clutch Bleeding of the hydraulic clutch actuator should be carried out when the depressed clutch pedal does not return or slowly returns to its original position, it...
Air removal with a special installation At service stations, bleeding from the hydraulic clutch actuator is usually carried out using a special installation. The unit applies pressure to the brake...
Removal and installation of release bearing If the release bearing is defective, noises are heard when the clutch pedal is depressed. Withdrawal Remove gearbox. Remove spring clip 7 and release lever 4...
Removal and installation of the clutch slave cylinder Withdrawal Draw off the brake fluid from the expansion tank to the level of the top-up hose. Caution: Brake fluid is poisonous. Do not suck liquid by mouth...