Clutch — general information The clutch in the car performs 2 tasks: when the gear is switched on, it opens the power circuit between the engine and the gearbox, and when starting off, it...
Removal and installation / clutch check Withdrawal Remove gearbox . To prevent the flywheel from turning when the bolts are loosened, lock it at the ring gear with tool -1- or with a wrench and a...
Removing air from the clutch actuator The clutch actuator must be bled when the clutch pedal does not return or returns slowly, the clutch does not disengage correctly, and also if the hydraulic...
Removal and installation of the clutch slave cylinder Withdrawal Only when releasing the hydraulic drive: Use a suitable siphon to suck out the brake fluid from the expansion tank up to the top-up hose connection....