Front axle and vehicle suspension BMW 5 Series E39
Front axle — general information Made of aluminum alloy, the front articulated axle with independent wheel suspension has a beam that is bolted to the body via rubber mounts. A separate beam...
Electronic Damper Control (EDC) An electronic shock absorber stiffness control system installed as an additional equipment (EDC) almost without inertia, it coordinates the stiffness of the...
Removal and installation of an amortization rack Withdrawal Remove caliper disc wheel brake and hang it on a wire to the body. Attention: Do not disconnect the brake hose, otherwise the brake system will need...
Suspension strut 1 - shock absorber 2 - corrugated cover 3 - thrust bearing 4 - top spring lining 5 - nut Tightening torque with an external hexagon on the piston rod: 65 Nm;...
Shock Absorber Inspection / Disposal A shock absorber defect is indicated by the presence of the following violations of the dynamic properties of the car. Prolonged oscillation of the body during...
Removal and installation of a nave of a forward wheel Attention: If noises are heard from the side of the outer front wheel in relation to the turn, this indicates a defect in the wheel bearing. Withdrawals Remove...
Removal and installation of the transverse lever Attention: After installation it is necessary to measure the parameters of the front axle. Withdrawal Hang up the engine and unscrew the fasteners of its...