If your vehicle's radio is equipped with an anti-theft system, make sure you have entered the correct code before disconnecting the battery cable. See section for information Anti-theft audio system and instrument panel language before disconnecting the wire.
If after connecting the wire on your instrument panel there are inscriptions in the wrong language that you need, refer to SectionAnti-theft audio system and instrument panel language, for instructions on how to set the desired language.
Withdrawal
1. Disconnect the negative battery cable.
2. Remove the steering wheel (Chapter Steering).
3. Loosen the screws on the top cover of the speaker with a Phillips screwdriver.
4. Loosen the two screws under the bottom of the column.
5. Remove the lower casing from the column first,..
...then top.
Installation
Install in reverse order.