Top casing
1. Set the steering column to the maximum down and extended position.
2. Remove the screw.
When installing, replace the spacer nut.
3. Push the top cover on both sides at the hatched areas and pull it up.
4. Remove the cover from the latches and remove it.
5. Installation is carried out in the reverse order. Get the hooks (1) into grooves (2).
6. Staple (1) should be hooked (2).
Bottom casing
1. Remove the screws.
2. Press down on the top cover from both sides in the places marked on the illustrations hatching, and remove the lower cover by pulling it down.
3. If necessary, release the leather cover from the casing clips.
4. Installation is carried out in the reverse order. brace (1 on illustrations) should be hooked (2).