Car engine cooling system BMW 7 Series E32

Cooling system circuit
The circulation of the coolant in the engine is controlled by a thermostat. While the engine is cold, the coolant circulates only in the cylinder head and in...

Cooling system — check
Using a simple test device, you can check the operation of the safety valve in the cover and check the system for leaks. Warm up the engine to operating...

Thermostat — Removal, Installation and Checking
Engine thermostat series M51 4 - thermostat housing; 5 - air bleed screw; 6 - thermostat; 7 - sealing ring; 10 - Hexagon head bolt. Engine thermostat series...

Fan/Fan Clutch — Removal and Installation
The fan viscous coupling should be replaced when the hub is dented. The fan should not turn or will turn with great difficulty. The coupling is also replaced...

Expansion tank — removal and installation
Remove the top part, pull the expansion tank up. Late models of the car Removal Remove the expansion tank cap. Caution: When the engine is hot, cover the cap...

Radiator — removal and installation
After a long mileage of the car, the thin channels in the radiator become clogged with coolant deposits and lime deposits. Because of this, the cooling...

Water pump — removal and installation
The water pump is driven by a poly V-belt. A fan is screwed onto the water pump shaft at the front. Elements of the water pump of the M30 engine 1 - water...

Cooling System Hoses — Maintenance and Repair in Emergency Situations
Coolant hoses are probably the most neglected components of any vehicle. However, careless owners are often surprised when a hose ruptures or otherwise fails....

Diagnostics of engine cooling system faults

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information: