- Torque wrench with a set of wrench heads.
Tightening of the steering mounting bolts to the specified tightening torques must be performed regularly.
Raise the car.
Tightening torque of the bolts securing the steering gear to the front axle beam of the frame: 40-50 Nm.
Tightening torque of the steering knuckle to the steering gear: not less than 60 Nm.
Locknuts and self-locking nuts of steering rod joints: 35 Nm.
Tie rod to tie rod end: 60 Nm.
Tie rod tie rod bolts: 15 Nm.
Crosspiece or joint disc to steering gear: 22 Nm.