Withdrawal
Remove instrument panel.
Rotate the defective bulb by approx. 45°and pull it out.
Replace incandescent pilot lamps as a set.
Turn defective bulb -arrows- by approx. 45°and pull out. At service stations, a special tool is used for this, but this can also be done with pliers.
Remove bulb from socket and replace.
Installation
Attention: Install the lamp of the required power. When installing a more powerful lamp, the cartridge may melt.
Insert the incandescent lamp into the socket.
Insert cartridge into instrument panel and lock by turning 45°.
Install the instrument panel.