Replacing the cabin filter (ventilation system) (BMW 7 Series E38)

1. Loosen the screws and remove the filter cover.

2. Release the filter from the clips and remove it.

3. Clean the filter cover and the inlet hole in it.

4. Installation is performed in the reverse order of removal.

[Information obtained from this online resource bmwman.ru]

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Article verified: Polikarpov Saveliy

Share information:

БМВ E38: Maintenance

Replacing spark plugs
Replacing brake fluid and bleeding the brake system
AT transmission oil change
Checking the condition of the protective covers of the CV joints of…
Checking the condition of suspension and steering components

Replacing the air cleaner filter element
Replacing the coolant
Checking the condition of the tires and their inflation pressure
Checking and caring for your battery
Checking the condition of the auxiliary drive belt

Similar articles on other types of BMW cars:
Replacing the cabin filter BMW 3 Series E46 (1998-2006, petrol)
Replacing the cabin air filter element BMW 3 Series E46 (1998-2006)
Replacing the air filter of the throttle actuator of the 1st chamber BMW 5 Series E12 (1972-1981)
Fuel filter preheating system BMW 5 Series E39 (1995-2003)
Microfilter housing for the cabin ventilation system BMW X3 E83 (2003-2010)
Replacing the cabin ventilation system microfilter BMW X5 E53 (1999-2006)

Link in different formats to this page

TextHTMLBB Code

Visitor comments

No comments yet