Home
BMW 3 Series
E21
4-cylinder engine
Supply system
Adjusting the starting gap of the air damper Solex «Zenit» 2B4

Adjusting the starting gap of the air damper Solex «Zenit» 2B4 (BMW 3 Series E21)

Remove the starter cover.

Move the lever to the air damper actuator and check the air damper clearance with a 4.2 mm drill.

If there is any deviation from the norm, achieve the proper clearance using the pneumatic drive adjusting screw.

If there is any deviation from the norm, achieve the proper clearance using the pneumatic drive…

(The original article is posted on the resource: BMWMan)

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Article verified: Polikarpov Saveliy

Share information:

БМВ E21: Supply system

Main parts of the Solex «Zenith» 2B4 carburetor
Solex DIDTA 32/32 Solenoid Shut-off Valve
Main parts of the Solex DIDTA 32/32 carburetor
Adjusting the Solex DIDTA 32/32 carburetor
Operating principle of the automatic starting device

Auxiliary starting device for Solex carburetor «Zenith» 2B4
Main parts of the Solex 1B2 carburetor
Auxiliary starting device for Solex carburetor «Zenith» 1B2
Air filter device for carburetor models
Fuel injection system

Link in different formats to this page

TextHTMLBB Code

Visitor comments

No comments yet