To check the pressure, a control pressure gauge 240000 or 133061 must be attached to the gearbox.
Before proceeding with the pressure test, make sure that the oil level in the gearbox is correct (oil level difference between marks «mini» And «maxi» dipstick is about 0.4 l).
Set the selector lever to position «R», start the engine at idle speed.
Connect the curved hose 240023 to the control pressure gauge, the other end of which, with the adapter 240022, connect to hole 1 on the gearbox housing, having previously unscrewed the plug.
Start the engine and bring the engine speed to 1500 rpm. Disconnect the linkage from the throttle control sector. Fully depress the brake pedal, tighten the handbrake. Then check the operating pressure of the automatic transmission (see values in subsection «Detailed Specifications») at idle and when forced into a lower gear, first at the position «R» selector lever, and then setting it alternately to the position «D» («A»), «2», «1», «R», «N» («0»).