The fuses are located in the fuse box located in the passenger compartment on the left next to the steering column.
Before replacing a fuse, be sure to first switch off the relevant consumers.
Disconnect the clips and remove the fuse box cover.
A blown fuse is identified by a melted metal strip.
Pull the blown fuse with the tweezers in the fuse box (arrow).
Insert a new fuse of the same rating. The latest technology fuses are used on the BMW 3 Series. They have blade contacts so that conventional fuses cannot be installed.
If a new fuse blows immediately, check the appropriate current circuit. The individual circuits are listed on the inside of the cover.
Never replace the fuse with a piece of wire or other auxiliary means, as this can cause serious malfunctions in the operation of the electrical equipment.
It is recommended that you always have several spare fuses in your vehicle. There are free spaces in the fuse box for storing them.
The fuse rating is printed on the back of its cap. In addition, the caps are painted in different colors, which can be used to determine the fuse rating. A - fuse thread.
Install fuse box cover, slide down and snap into place.
Fuse table
The set of fuses depends on the composition of the equipment and the year of manufacture of the car. The actual composition of the fuses is indicated in the operating instructions.