Clean the brake pads and calipers with compressed air or a cloth soaked in alcohol.
Attention: Do not inhale brake dust!
Apply Plastilube or Liqui Moly LM-508-ASC High Temperature Paste to the following areas:
- All available locations on the rear plate of the brake shoe.
- The front side of the pistons.
- Contact surfaces for brake brackets.
- Sliding surfaces of brake calipers.
Caution: Plastilube or high temperature paste must not come into contact with the working surfaces of brake discs or brake pads. Remove the remaining paste on them with a rag or rinse with alcohol.
Install brake pads.