Lamps of the main saloon lamp
1. Remove the ceiling light assembly (see Section Removal and installation of internal lighting devices).
2. On models with individual lighting fixtures, turn the corresponding lamp socket counterclockwise and remove it. Take out the lamp.
1 - Lamp holder of the left individual lamp
2 - Cartridge of the main saloon lamp
3 - Lamp holder of the right individual lamp
3. On models without individual lights, remove the screws (1), remove the ceiling light (2) from the diffuser underneath and remove the bulbs.
Vanity mirror lamp
1. Remove the mirror light (see Section Removal and installation of internal lighting devices).
2. Open the contact arcs (1) and remove the lamp (2).
Interior door handle illumination LED
1. Remove door trim (see chapter Body).
2. Disconnect the LED with cable (1) from the flask (2).
3. Cut the cable (1) LED length (A = 10 cm) from the door wiring harness.
4. Cut the end of the wire of the new LED 16 cm long.
5. Connect the door wiring harness and the LED cable with a butt connector and tubing.
6. Fix the repair area to the door wiring harness.