- Install the car on a horizontal surface;
- Replace damaged diffusers and mirrors, as well as blackened incandescent lamps;
- Check and, if necessary, correct the tire pressure;
- Place a load of 75 kg on the driver's seat;
- Fill up a full tank of fuel or put a load with the appropriate weight in the luggage compartment;
- Check that the headlights are correctly aligned with the hood (gaps);
- On models with manual headlight range adjustment, turn the control to position 0;
- On models with automatic headlight beam throw, wait 30 seconds after turning on the headlights;
- On models with xenon headlights, after turning on the headlights, wait 80 seconds, during which time the car must be stationary and not subject to vibrations;
- Align the adjustment device along the longitudinal axis of the vehicle, parallel to the plane on which the vehicle is standing. Set risk (M) on the device for size (e). The divisions of the scale on the device indicate the slope (cm) at a distance of 10 m.
e - Target headlight adjustment value: according to the nameplate on the headlight housing in % (e.g. 1.0% = 10cm / 10m = «10» on the device);
Fog lamp adjustment target value: all vehicles 2.0% = 20 cm / 10 m = «20» on the device
H - The height of the middle of the beam of light above the plane of the car installation
H - H - e = mark height above vehicle mounting plane
- Center mark = center of high beam
M - Risk device for headlight adjustment
S - The plane of installation of the car and the device for adjusting headlights
2. Headlights are adjusted using ratchets (1 and 2).
1 - Height adjustment
2 — Adjustment on the sides
Definitely correct mutual position of the adjusting ratchets is impossible.
3. The height of the fog lamp is adjusted using the adjusting screw (1) through the bottom hole.