Withdrawal
1. Strongly pull the rear seat up on both sides and thus remove it from the brackets.
2. Pull the seat forward slightly under the backrest, remove the belt buckles and remove the seat from the vehicle.
3. Pull the backrest forward at the top of the outer sides and remove.
4. Tilt the backrest from the top forward and remove it from the eyelets with four hooks.
Installation
5. Insert the backrest with the lower tabs on the left and right into the guides -1-.
6. Tilt back. While doing this, place the outer seat belt over the backrest.
7. Check whether the support elements are located on the left and right in the backrest above the holders -2-, correct if necessary. Press firmly on the backrest and lock it into place.
8. Replace the seat.
9. Pass the locks through the holes in the seat.
10. Slide the seat back under the backrest so that the front brackets are over the tabs in the bottom. In this position, firmly press the seat down and lock.