Note: The ignition timing can only be checked, but not set. If there are deviations from the specified values, it is necessary to identify the failed elements of the ignition system and replace them.
Warm up the engine. Operating temperature is reached when the lower radiator water hose warms up. Oil temperature should exceed +60°C, and coolant temperature +80°C.
See Figure Y-1209
Connect the RPM meter and stroboscope in accordance with the operating instructions.
Start the engine and let it idle.
Point the stroboscope at the arrow on the timing case cover.
Caution: Be careful when the pulley and belt are rotating.
When the ignition timing is set correctly, the TDC mark 1 should appear motionless and be aligned with the reference mark 2. It is recommended to highlight the marks with white paint.
The website served as the basis for the text «www.bmwman.ru»