Seat cushion
1. On models with rear seat heating and/or e/drive head restraint adjustment, disconnect the appropriate wiring connectors.
2. To do this, press the latches, raise the rear seat to the maximum position (A = 150 mm) and disconnect the connector.
3. Remove the rear seat cushion.
Back
1. Remove the headrest and rear seat cushion.
2. Turn out a bolt of fastening of a seat belt (1), give the nut (2). On models with rear seat heating, disconnect the connector (3). Fold back the soundproofing cover (4) forward and remove the bolt (5).
3. Remove the cover.
4. Squeeze out the clips, disconnect the roller from the seat belt cover and pull out the seat belt tape.
5. Remove a back of back sitting upwards.
6. Installation is carried out in the reverse order. Attach the hinges to the tabs and secure the rear seat backrest with bolts.