2. Remove the seat belt mounting bolt.
3. Unlock the lock (1) by pulling it towards you and remove it by pulling it inwards. Remove the cable (2) of the seat belt height adjustment mechanism drive by pulling it away from you.
4. Move the front seat as far forward as possible, slightly lift (1) the central cover by the locking element, release (2) and lift the tongues of the inner clips and remove (3) the cover by moving it towards you.
If the sequence of operations is not followed during removal, the jumper (4) may be broken and the lining may be damaged.
5. Disconnect the electrical wiring connector.
6. Remove the bolts and move the front seat as far as possible back.
When installing, replace the bolts or treat the old bolts with Loctite 270.
7. On models prior to 1995, release the front clips and remove the trim panel away from you.
8. Remove the bolts and remove the front seat.
When installing, replace the bolts or treat the old bolts with Loctite 270.
9. Installation is carried out in the reverse order. Do not allow the edges of the mat to get between the seat guides and the bottom of the car body at their attachment points. Before final tightening of the bolts, all bolts must be screwed in by hand, and the seat must be leveled.