Attention:
- Avoid damage to adjacent body elements.
- For vehicles with side airbags, it is necessary to comply with safety requirements when handling the airbags.
Note: The drawings are symbolic representations and should be matched to the corresponding vehicle type.
1. Open the door.
2. Disconnect the battery.
3. Remove the screw on the connector frame.
4. Remove the screw (1) of the door stop.
Caution: Take precautions against the door falling.
5. Remove the screws between both links of the lower and upper hinges.
6. Remove both screws from the hinges.
Tightening torque: 10 Nm.
7. Remove the door and lower it onto a suitable support.
8. Remove the connector from the door pillar, unlock it by pulling out the bracket, and disconnect.
Note: When installing, it is necessary to adjust the position of the door.
9. Installation should be carried out in the reverse order of removal, taking into account the above notes.