Withdrawal
1. Disconnect -1- and turn it upwards.
2. Turn out screws -1-. 2 – peak of the gear lever.
3. Slightly raise the visor -2- and remove the power window switch -3- from below. To do this, press the lock -4-.
For clarity, the visor in the accompanying illustration is shown in a rotated position.
4. Pull out the alarm/single lock switch.
5. Disconnect the connector.
Installation
6. Dock the connector at the switch.
7. Connect the power window switch to the visor of the shift lever, press on the other side and fix.
8. Push the hazard/unit lock switch into the visor.
9. Fasten the visor and connect the cover to it.