Withdrawal
1. Disconnect the plug connections of the spark plugs by turning the knob -1- to the left.
2. Turn away 2 nuts of fastening of coils of ignition to the holder and remove coils.
3. Mark the ignition cables with tape to avoid confusion. Cylinder 1 is ahead in the direction of travel. Disconnect the cables from the underside of the ignition coils.
4. Disconnect the cables from the spark plugs.
Installation
5. Connect the ignition cables to the spark plugs.
6. Connect the ignition cables to the coils at the bottom, observing the markings.
7. Fix ignition coils with two nuts to the holder.
8. Connect the plug connections of the ignition coils and secure with handwheels.