After checking or repairing the front axle or performing steering operations, check the alignment of the front wheels. In this case, only the convergence of the front wheels can be adjusted.
Checking and adjusting the wheel alignment angles are carried out on special optical or mechanical stands according to the instructions.
Check the air pressure in the tires, the condition of the wheel rims and make sure that the mark on the steering gear housing matches the mark on the bipod shaft, i.e. that the front wheels are in the straight ahead position.
Put the car under load (cm. «Detailed Specifications»).
Consistently check the camber angles of the front wheels, the longitudinal angle of inclination of the axis of rotation and the angles of rotation of the wheels.