1 - Switching on the periodic glass cleaning mode
2 - Normal wiper speed
3 - Increased wiper speed
4 - Single wash
5 - Automatic washer mode
6 - Automatic mode for intensive glass cleaning
Cleaning headlights and fog lights*
With the lights on, turn on the automatic washer mode or the automatic intensive cleaning mode.
Position 1 - periodical glass cleaning mode
The duration of the intervals depends on the speed of movement. Additionally, it is possible to program the cleaning interval*:
To program the interval for a short time, move the lever from the position "1" into position "0".
Time to restart (transition from position "0" into position "1") and will be the program value of the duration of the interval (the maximum possible period is 20 seconds, when the car is stationary, the interval is doubled).
Switching off programming: move the lever to the position"0" or turn off the engine.
Position 2 - normal wiper speed
When the vehicle is stopped, it automatically switches to intermittent operation.
Heated washer nozzles*
It turns on automatically when the ignition key is in the "2".
Attention: The windshield washer can only be turned on if the freezing of the liquid on the windshield is excluded, otherwise visibility will be reduced! The windshield washer must not be switched on when the tank is empty, otherwise the washer pump may fail.
Make sure that the wiper blades do not freeze to the glass, otherwise the electric motor may fail.