No special tool required.
The following wear parts must be purchased:
- Fuel filter according to engine type.
Gasoline engines
The fuel filter is located under the bottom of the car on the right in front of the fuel tank. Therefore, a jack and stands are required. In addition, it is necessary to have two clamps for blocking the supply and output fuel hoses. You can also use clamps.
Withdrawal
Caution: Do not make open flames. Fire hazard!
Raise the car.
Clamp off fuel hose 1 from fuel pump to filter.
Close the fuel hose 2 with a clamp and disconnect it from the filter, after releasing the clamp.
Unscrew filter bracket 3 and pull out filter with fuel hose.
Disconnect the fuel hose from the fuel filter, after releasing the clamp.
Installation
Connect the hose leading to the distributor tube to the new filter 1 and secure with a clamp.
Connect the second hose 3 to the filter and secure with a clamp.
Insert the filter with elastic seal and screw on the bracket. At the same time ensure the correct installation position of the fuel filter. Arrow 2 on the filter housing must indicate the direction of fuel flow.
Remove clamps from hoses.
Start the engine and check the tightness of the fuel hose connection.
Lower the car.