Audio unit and speakers (BMW 7 Series E38)

Audio block

1. Remove the protective caps on the right and left sides and unscrew the screws.



2. Remove the audio unit and disconnect its electrical wiring connector.

Mid and high frequency speakers

1. Remove the door trim (see chapter Body).



2. Remove the screws (1) and remove the midrange speaker.

3. Loosen the toothed washers and slide the tweeter forward.

Replace the toothed washers when installing.

Rear speaker (on the shelf behind the back seat)

1. Release the clips and remove the speaker panel.



2. Remove the screws, lift the speaker and disconnect the connectors.