Removal and installation the brake caliper of the left or right front wheel
1. Remove the wheels.
Note: After completing the work, it is necessary to bleed the brake system.
2. Fully depress the brake pedal and secure it with the stop.
Note:
- The pedal stop may only be released after the brake lines have been connected.
- Opening the brake system lines prevents brake fluid from leaking out of the master cylinder reservoir and air from entering the system.
Caution: Hold the brake hose by the square to prevent the connector from turning in the mounting corner.
3. Disconnect the brake hose from the brake system pipeline (1).
Tightening torque: 14 Nm.
Attention: Make sure the bracket is installed correctly.
4. Remove the bracket (2) and take the brake hose out of the holder.
5. Disconnect the brake hose (3) from the caliper.
Tightening torque: 19 Nm.
6. Unscrew the bolts (1) and remove the caliper.
Tightening torque: 19 Nm.
7. Installation should be carried out in the reverse order of removal, taking into account the above notes.