Exhaust system assembly (N47 engine) (BMW X3 E83)

Removal and installation of the exhaust system assembly (n47 engine)

Caution: Perform these tasks only on a cold engine.

1. Support the exhaust system with tool 312220.

Caution: An assistant is required to remove the exhaust system.

2. Loosen the clamp (1).

Tightening torque: 51 Nm.



3. Unscrew the nuts (1).



Tightening torque: 21 Nm.

Note: Replace nuts.

4. Unscrew the nuts.

5. Remove the exhaust system.

7. Installation should be carried out in the reverse order of removal, taking into account the above notes.

Note: After installation, the exhaust system must be checked for leaks.

The original article is posted on the resource BMWMAN