Removal and installation of the exhaust system assembly (n46 engine)
Caution: Perform these tasks only on a cold engine.
1. Support the exhaust system with tool 312220.
Caution: An assistant is required to remove the exhaust system.
2. Unscrew the nuts.
3. Remove the screws.
4. Loosen the nuts (1) and remove the exhaust system assembly.
Note: During installation, the nuts must be replaced.
5. Installation should be carried out in the reverse order of removal, taking into account the above notes.
Note: After installation, the exhaust system must be checked for leaks.