- Home
- BMW X5
- E53
- M54 petrol engine
- Exhaust system
M54 engine exhaust system BMW X5 E53
Exhaust system — design description
The exhaust system includes two exhaust manifolds with three-component catalytic converters (Fig. 3.29) and two oxygen content sensors in the exhaust system,...
The exhaust system includes two exhaust manifolds with three-component catalytic converters (Fig. 3.29) and two oxygen content sensors in the exhaust system,...
Work on the exhaust system
The design of the exhaust system is shown in Fig. 3.29 and Fig. 3.30. Attention! All work on the exhaust system must be performed only on a cold engine, due to...
The design of the exhaust system is shown in Fig. 3.29 and Fig. 3.30. Attention! All work on the exhaust system must be performed only on a cold engine, due to...
Replacing both exhaust manifolds
Attention! Removal of the rear exhaust manifold with the neutralizer is possible only after removal of the front exhaust manifold with the neutralizer. The...
Attention! Removal of the rear exhaust manifold with the neutralizer is possible only after removal of the front exhaust manifold with the neutralizer. The...
Replacement of the exhaust system
Removing the exhaust system (see fig. 3.30) it is necessary to carry out this procedure with an assistant, in the following order. Allow the exhaust system to...
Removing the exhaust system (see fig. 3.30) it is necessary to carry out this procedure with an assistant, in the following order. Allow the exhaust system to...
Replacing mufflers
Replacing the front muffler (1, see Fig. 3.30) the exhaust system must be carried out in the following order. Prepare the "00.2.210" tool. Allow the exhaust...
Replacing the front muffler (1, see Fig. 3.30) the exhaust system must be carried out in the following order. Prepare the "00.2.210" tool. Allow the exhaust...
Replacing the oxygen concentration sensor in the exhaust gas
Attention! All work on the exhaust system must be performed only on a cold engine, due to the risk of getting burned. Control over compliance with exhaust gas...
Attention! All work on the exhaust system must be performed only on a cold engine, due to the risk of getting burned. Control over compliance with exhaust gas...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Similar sections for other types of BMW cars:
Power unit: Exhaust system BMW 3 Series E46 (1998-2006)
Power unit: Exhaust system BMW 5 Series E39 (1995-2003)
Power unit: Exhaust system BMW 7 Series E32 (1986-1994)
Power unit: Intake and exhaust system BMW X3 E83 (2003-2010)
Power unit: Exhaust system BMW 3 Series E46 (1998-2006)
Power unit: Exhaust system BMW 5 Series E39 (1995-2003)
Power unit: Exhaust system BMW 7 Series E32 (1986-1994)
Power unit: Intake and exhaust system BMW X3 E83 (2003-2010)
Share information:
- General information
- Manual
- Maintenance
- M54 petrol engine
- Engine repair
- Lubrication system
- Cooling system
- Supply system
- Injection system
- Exhaust system
- Engine electrics
- M62 petrol engine
- Engine repair
- Lubrication system
- Cooling system
- Supply system
- Exhaust system
- Engine electrics
- N62 petrol engine
- Engine repair
- Cooling and lubrication system
- Power and exhaust system
- Engine electrics
- Diesel engine M57
- Engine repair
- Lubrication system
- Cooling system
- Power and exhaust system
- Engine electrics
- Turbocharging system
- Transmission
- Clutch
- Mechanical gearbox
- Automatic gearbox
- Transfer case and cardan
- Chassis
- Brake system
- Steering
- Front suspension
- Rear suspension
- Wheels and tires
- Body
- Exterior
- Interior
- Doors and windows
- Repair and maintenance
- Heater and air conditioner
- Electrical equipment
- Equipment and devices
- Levers and switches
- Electrical circuits