Withdrawal
Remove inner door trim.
If the inner seal of the door shaft has not been removed together with the lining, remove it.
Remove the film from the door cutout.
Install the glass in such a position that the mounting bolts are visible in the cutout.
Loosen the two glass screws.
Tilt the glass forward from the guide.
Pull glass up.
Installation
Insert glass from above.
Insert the glass from the front into the guide and fasten at the back with 2 screws. Adjust glass.
Carefully stick the film on the door cutout. The film must not be damaged, otherwise there will be drafts in the cabin.
Clip the door shaft seal onto the door trim. Install the inner door trim.