Withdrawal
1. Lower the glass all the way down.
2. Remove the door lining, remove the cover on the right side at the top, refer to the relevant section.
The side airbag does not need to be removed.
3. Take out a small screw-driver two clips - 2 - covers - 1 - from a forward end face of a door.
4. Remove the cover -1-, while starting from the bottom. Remove the cover from the door stop.
5. Remove the cover at the top from the flat clip (pos. And in the illustration) and push up so that you have access to the mirror mounting screws.
6 Disconnect the anti-pinch connector (white/black cable).
7. Turn away screws of fastening - 2 - a sound signal of a high tone - 1 - and remove it.
8. Disconnect the exterior mirror connector.
9. Holding a mirror outside, turn out the screw -3-.
10. Remove the mirror while passing the electrical wires through the door.
Withdrawal
11. Install the mirror, while passing the electrical wires through the door.
12. Holding the mirror outside, fix it with the screw -3-.
13. Fix the high-pitched horn. Tighten screws -2- and -3- to 6 Nm.
14. Mate the exterior mirror and anti-pinch connector.
15. Press the pinch protection into the clip -A-.
16. Insert the anti-pinch cover onto the door stop and secure with two clips to the end of the door.
17. Install the door trim, refer to the appropriate section.