Pressure relief
1. Remove the fuel pump fuse from the fuse box. This fuse is located in the main box in the glove box on the passenger side. The position of the fuse in the box is indicated on its cover.
2. Start the engine and let it run until it stalls. Switch off the ignition.
3. Turn away a cover of a jellied mouth.
4 Now there is no pressure in the fuel system.
Note. Lay rags around the fuel line connection you wish to disconnect. There could be fuel left in the system and it will definitely spill.
5. Before working on any part of the fuel system, disconnect the negative battery cable.
Initial filling
6. Replace the fuel pump fuse. Switch on the ignition and wait a few seconds for the fuel pump to fill the system. If you are not going to start the engine, turn off the ignition.