1. Raise the front of the vehicle and place it on stands for easier access (cm. "Lifting and placing the car on supports"). Make sure the vehicle is level.
2. Turn out a stopper of a control/filler opening of a transmission located on the right side of the case of a transmission (pic. 2.2).
3. The oil level should reach the lower edge of the hole.
4. If necessary, bring the oil level to the required level. Use the recommended type of oil (cm. "Lubricants and fluids") and add it until it appears in the hole.
5. Wipe off all traces of oil, then screw in the plug and tighten it to the required torque.
6. Lower the vehicle to the ground.