Withdrawal
Disconnect the ground wire from the battery.
Carefully remove the radio cover with a screwdriver.
Remove rotary knob.
Hooks are supplied with the radio to release the locks. Insert the hooks into the left and right clips -arrow-.
Reject both hooks to the center.
Pull out the radio.
Disconnect the antenna and all connectors from the back of the radio.
Installation
Connect the antenna from the back of the radio receiver and connect the following connectors: B+ and ground connector, electronics and backlight power connector, loudspeaker connector, automatic antenna connector (if available), adapter connector.
Insert the radio receiver, the clips lock automatically.
Position the trim and insert the thumbturn.
Connect ground wire to battery.
Turn on the radio and check its operation.