Note: Changing the camber angle always results in a change in wheel alignment, so adjust the camber first.
1. Adjust the camber angle of the rear wheels.
1) Install a new nut (2) and tighten it to a torque of 5 Nm.
2) Turn the eccentric bolt (1) to set the camber to the specified value.
3) Tighten the nut (2).
Tightening torque: 100 Nm.
2. Adjust the wheel alignment.
1) Loosen the bracket bolts by 1-1.5 turns.
2) Place tool 323030 on the bolt head and pin (1).
3) Rotate tool 323030 to set the toe-in to the specified value.
4) Tighten the screws.
Tightening torque: 77 Nm.