Caution: Follow the ESD protection instructions (ESD - Electrostatic Discharge).
Note: Fully extend and lower the steering wheel.
1. Cover the instrument panel trim (1) and the upper steering column cover (2) with crepe tape.
2. Loosen the screws (1).
3. Carefully pull the instrument cluster (2) back.
4. Disconnect the corresponding connector.
5. Remove the instrument cluster (2).
6. Installation should be carried out in the reverse order of removal, taking into account the above notes.
7. Perform coding/programming.
(Information obtained from this online resource: «www.bmwman.ru»)